Conrad DV928 Bedienungsanleitung Seite 76


With a brief press of the button "SET" (3) on the right side, you should now be able to switch between
the city you have selected, the display of the sunrise/sunset times for this city and the display of the time
and date.
With the button "CHANNEL" (4) on the right side you can select the channel for the temperature/outdoor
humidity sensor, depending on the one you have set. (If you only use one temperature/outdoor humidity
sensor, this must be set to channel 1!)
You can start another search for the outdoor sensor by pressing the button " " (16) on the back for
approx. 3 seconds until the reception symbol for the outdoor sensors starts to blink. The reception
attempt takes approx. 2 minutes. Do not press a button during this time and do not move the weather
station and the sensors.
Of course, you can make or change all settings, e.g. the country and the city, for the METEOTIME
weather display, the unit selection for the air pressure, altitude, etc. retrospectively. You do not have
to repeat the entire setting.
• Use the support base on the back of the weather station to install it in a suitable place.
For wall mounting (opening on the back of the weather station), simply pull off the base downwards.
Select an installation site that is not exposed to direct sunlight, otherwise you may receive wrong measuring values
for the temperature/air humidity. Also keep a sufficient distance to radiators.
To obtain a good radio reception, install the weather station as far away as possible from electric/electronic devices,
metal parts, cables or similar.
Protect valuable furniture surfaces with a suitable pad or similar to avoid scratches.
73