Features - Renkforce S1 Bedienungsanleitung

• This product is not a toy and not suitable for children. Children cannot judge the dangers in-
volved when handling electrical devices.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibra-
tions or heavy mechanical stress.
• Make sure the device is sufficiently ventilated when in operation. Never cover the casing.
• Do not place any open sources of fire, such as burning candles, on or directly next to the de-
vice.
• Do not place any containers with liquids, e.g. glasses, buckets, vases or plants in the immedi-
ate proximity of the product. Liquids may get into the housing and impair electrical safety. This
also poses great danger of fire or potentially fatal electric shock! If this is the case, first power
down the respective mains socket (e.g. via the associated FI switch and circuit breaker) and
then pull the mains cable from the socket. Disconnect all cables from the device. Do not oper-
ate the product anymore afterwards, but take it to a specialist workshop.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Only operate the device in moderate climates, never in tropical climates.
• Do not leave any packaging material unattended. It may become a dangerous toy for children.
• Also observe the additional safety information in the individual chapters of these operating
instructions.
• In commercial institutions, the accident prevention regulations of the Employer's Liability In-
surance Association for Electrical Systems and Operating Materials are to be observed.
• If you are not sure of the correct connection or if there are any questions that are not covered
by the operating instructions, do not hesitate to contact our technical support or another spe-
cialist.

5. Features

• 10 W high-performance LEDs
• Colours: 7 + 1 (white) with rainbow effect
• Gobos: 7 + 1 (open) with gobo shake effect
• Adjustable strobe effect
• LED display for easy operation
• Stand-alone operation, master-slave operation and DMX operation
• Integrated microphone for sound-to-light control
• Installed fan to protect against overheating
26