Care And Maintenance - Elite ARION Bedienungsanleitung

Even if you would instinctively tend to look at the front
wheel, you will keep balance better and pedal "in a
straight line" if you concentrate on an object located
2.5 – 4 metres (10-15 feet) in front of you.
7) If you start leaning or shift to the side of the drums,
correct your position with very light steering
movements. If you steer to much you will lose balance
or end up over the side of the rollers.
8) Keeping a fast and smooth pedalling style will help
you stay balanced on the rollers, thanks to the
gyroscopic effect of the wheels.
9) At first, pedalling on the rollers will give you a
feeling of instability, and moving the handlebar too
abruptly or pedalling heavily can make you lose
control. The big advantage of the rollers, compared to
standard training tools, is that the rollers teach you to
reduce the movement of the upper part of your body
and maintain a steady pedalling pace.
10) Do not use the bicycle brakes to stop. Rest a foot
on the ARION frame and allow the bicycle to come to
a stop.

CARE AND MAINTENANCE

1) Prolonged exposure to direct sunlight can cause
deformation of the technopolymer rollers. Do not use
or keep the rollers in places where they are exposed
to direct sunlight.
2) Always clean the rollers after use. Only use a damp
cloth. Do not use solvents or harsh detergents.
3) If the ARION is not going to be used for a
prolonged period, release the drive belt, bringing it
out of its seat, or close it, otherwise the belt's tension
could cause early loss of transmission efficiency.
4) The coupled bearings on the roller do not require
lubrication and are practically maintenance-free.
5) Periodically check the roller clamping screws,
make sure that they are still tight but not so tight as to
damage the plastic frame.
6) In case of wear or breakage of the drive belt,
replace it by proceeding as follows:
• remove the rectangular covers
• undo the fixing screw located in the side member of
the front roller A , on one side;
• undo the fixing screw located in the side member of
the middle roller A on the same side as the previous
one;
• replace the belt, refit the rollers in their correct seats
and secure all the screws again;
• close the two sides with the rectangular covers
7) Drive belts and other spare parts for the ARION are
available from you local Elite dealer.
IMPORTANT
Read and follow the enclosed instructions.
Keep people, children and animals away from the
roller during use, since the moving and rotating parts
of the roller and the bicycle can cause damage in
case of contact.
Before starting training, position the trainer in a dry
place, away from potentially hazardous objects
(furniture, tables, chairs, etc.) in order to avoid any risk
of inadvertent or accidental contact with them.
Technical assistance:
Fax 0039 049 5940064
e-mail: contatto@elite-it.com
EN
B ;
B .
13