Using The Device; Operation - Conrad 67 20 03 Bedienungsanleitung

8. Using the device

This product can be used as a stand-alone device without a wall
power supply (not included in delivery). However, the device
can be powered by the wall power supply (6 V(DV, min. 120 mA)
additionally or exclusively.
• Open the battery compartment (14) by pulling off the battery compartment lid.
• Insert 3 x 1.5V AA batteries into the battery compartment (14) with the correct
polarity.
• Close the battery compartment (14) by sliding the lid back on.
• If necessary, connect the wall power supply (available as an accessory; 6 V/DC,
min. 120 mA) to the power supply connection (15).
• Plug the power supply into a standard mains socket (230 V/AC 50 Hz).
When the batteries are inserted, the LC display lights up and
the clock searches for the radio signal. This process takes
about 3 to 5 minutes.
For optimal reception of the radio signal, we recommend pla-
cing the MP3 alarm clock close to a window.
When the radio signal is received, time and date are automat-
ically set and the radio
If no radio signal is received, the
If this is the case, the user can set the time manually.
See chapter: „10. Setting the time manually"
30
symbol is displayed.
symbol is not displayed.