Selecting Temperature / Alarm 1 / Alarm 2 / Dual Time; Setting The Time Manually - Conrad 67 20 03 Bedienungsanleitung

9. Selecting temperature / alarm 1 / alarm 2 /
dual time
Press the "MODE" button (3) once to display alarm time 1
(bottom right-hand corner of display (13)).
Press the "MODE" button (3) again to display alarm time 2
(bottom right-hand corner of display (13)).
Press the "MODE" button (3) again to display dual time (bot-
tom right-hand corner of display (13)).
Press the "MODE" button (3) again to display the temperature
(bottom right-hand corner of display (13)).

10. Setting the time manually

Use the "MODE" button (3) to set the date and the time.
Hold down the "MODE" button (3) for 3 seconds in normal
clock mode when the radio symbol is not displayed. The
hour starts flashing.
Set the current hour using the "+/-" button (10).
Press the "MODE" button (3) again. The minutes start flash-
ing.
Set the current minutes using the "+/-" button (10).
31