International Time Display And Settings; Setting Dual Time - Conrad 67 20 03 Bedienungsanleitung

• Press the "SNOOZE/LIGHT" button (5) to interrupt the alarm. The backlight is
activated for 5 seconds. The alarm goes off
again after 4 minutes.
• If the alarm is not deactivated, it will continue for 4 minutes.

15. International time display and settings

• Hold down the "+" button (10) for 3 seconds. The symbol is displayed.
• Hold down the "MODE" button (3) while the temperature is displayed in the bot-
tom right hand corner.
• To set the time, see chapter "10. Setting the time manually".
• Hold down the "-" button (10) to select the time display.

16. Setting dual time

• Hold down the "MODE" button (3) until "DUAL TIME" is displayed in the bottom
right-hand corner.
• Hold down the "MODE" button (3) for three seconds. The hour starts flashing.
• Set the desired hour using the "+/-" button (10).
• Press the "MODE" button (3). The minutes start flashing.
• Set the desired minutes using the "+/-" button (10).
• Press the "MODE" button (3). The settings are applied.
35