Reely 1:10 EP Carbon Fighter Bedienungsanleitung Seite 58

Steering or driving motions opposite to movement of steering wheel and transmitter throttle/brake lever
• Put the reverse switch for steering or the drive at the transmitter in the right position.
• If the brushless motor is disconnected from the speed controller and reconnected, the alignment of the three connection
cables is not correct (this may not be possible with this vehicle, because there is no plug connection between the
motor and the speed controller). Simply swap two of the three cables between motor and speed controller. This will
reverse the rotational direction of the brushless motor.
The steering is not functioning or is functioning incorrectly, steering lock too slight on the vehicle
• If the transmitter offers a dual rate setting, check it (see operating instructions for the transmitter). If the dual rate
setting is too low the steering servo will no longer react.
• Check the steering mechanism for loose parts, check e.g. whether the servo arm is correctly fastened to the servo.
56