Delivery Scope; Initial Operation - VOLTCRAFT VC-666 Bedienungsanleitung

If you have reason to assume that safe operation is no longer possible, disconnect the
device immediately and secure it against inadvertent operation. It can be assumed
that safe operation is no longer possible if:
- the device is visibly damaged,
- the unit does not operate any longer and
- the unit was stored under unfavourable conditions for a long period of time or
- if it has been subjected to considerable stress in transit.
Do not switch the measuring instrument on immediately after it has been taken from a
cold to a warm environment. Condensation water that forms might destroy your
device. Leave the device switched off and wait until it has reached room temperature.
Do not leave the packaging material lying around carelessly since such materials
can become dangerous toys in the hands of children.
You should also heed the safety instructions in each chapter of these instructions.

Delivery scope

Multimeter with permanently attached measuring leads
1 battery 12V (type 23A)
Operating instructions

Initial operation

The battery is already inserted in the DMM upon delivery.
Rotary switch
The individual measuring functions can be set via the rotary switch. If the rotary
switch is set to „OFF", the measuring device is switched off. Always turn the mea-
suring device off when it is not in use.
26