VOLTCRAFT VC-666 Bedienungsanleitung Seite 37

Max. input sizes/overload protection
Voltage measurement
Current measurement
Overload protection
Do not exceed the maximum permitted input values. Do not
touch any circuits or parts of circuits, if they can have higher
voltages than 25 V Acrms or 35 V DC. Mortal danger!
Regularly check the technical safety of the device and the measu-
ring cables, e.g. for damage to the casing etc. Do not use the mea-
suring device in case of damage!
The measuring range diodes and the battery test, rectangular
signal generator as well as resistance measuring are not protec-
ted against excess input voltage or overload. Exceeding the
max. admissible input values or overload may damage the mea-
suring device or lead to mortal danger!
36
250 VDC or VACrms (rms = effective)
max. 200 mA DC, max. 250 VDC
Fine fuse 5 x 20 mm (F200mA/250V)
Quick-acting 200 mA, 250 V. May only be exchanged
by an expert.