Product Description; Scope Of Delivery - VOLTCRAFT ST-100 Bedienungsanleitung

6. Product Description
The multimeter (referred to as DMM in the following) indicates measured values on the digital
display. The measured value display of the DMM comprises 2000 counts (count = smallest
display value).
A rear setup bracket permits a slightly inclined position that facilitates reading of the display in
measuring operation.
The individual measuring functions are selected via a dial switch in which the automatic range
selection "Auto range" is active. The appropriate measurement range is set individually for each
application.
To protect the meter's batteries, automatic deactivation is active at all times. It switches off the
device on its own after approx. 15 minutes.
The integrated Sat finder permits quick setting of satellite systems. The sat meter is dragged into
the signal line. The LNB supply takes place via a satellite receiver.
For voltage supply of the multimeter part, two micro batteries (type AAA) are needed (enclosed).
Other additional functions are
• "HOLD" keeps the last measured value in the display
• "MAX" keeps the peak value in the display
The meter can be used for do-it-yourself or for professional applications up to measuring cat-
egory CAT III.
7. Scope of Delivery
• Multimeter
• 1 Set safety measuring lines
• 2 Micro batteries
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
32