Technical Data; Measurement Tolerances - VOLTCRAFT VC-666 Bedienungsanleitung

Technical data

Display
Measuring frequency
Input resistance
Operating Voltage
Ambient conditions
Dimensions (LxWxH)
Weight

Measurement tolerances

Statement of accuracy in ± (% of reading + display error in counts (= number of
smallest points)). The accuracy is valid for one year at a temperature of +23°C ±
5°C, and at a relative humidity of less than 75 %, non-condensing. The warming-up
time is about 1 minute
Type of operation
Direct voltage
Alternating voltage
45 - 400 Hz
Direct current
Resistance
Diode test . . . . . Test voltage: 2V / test voltage 1 mA (on 2 MOhm)
Battery test . . . . 50 mA load current in 1.5 V range
2000 counts
2.5 measurements per sec.
>1 MΩ
12V (23 A)
Operation: 0°C to 40°C, max. 80 % rel. air
humidity (non-condensing)
95 x 52 x 26 (mm)
ca. 100 g
Measuring range
200 mV
2,000 mV - 250 V
200 -250 V
2000 μA - 200 mA
200 Ohm - 2000 kOhm
5 mA load current in 9 V range
Accuracy
±(1.5% + 2 counts)
±(2.5% + 2 counts)
±(2.5% + 15 counts)
±(2.5% + 10 counts)
±(2.5% + 5 counts)
35