Maintenance And Care; A) Replacing The Propellers - Reely Sky Roller Bedienungsanleitung

13.

Maintenance and Care

Clean the exterior of the model and the remote control only with a soft, dry cloth or brush. Never use abrasive cleaning
agents or chemical solutions as these could damage the surfaces of the casings.
The propellers must move smoothly and the motor shafts must neither be bent nor have any play in their bearings.
Propellers that are torn or where small parts have broken off must always be replaced.

a) Replacing the Propellers

The propellers (1) are only pushed onto the motor
shafts (2) and can be gently pushed off of the shaft.
Pull off the defective propeller with the fingers and en-
sure that the motor shaft is not bent when pulling it off.
The new propeller is pushed not the motor shaft straight
from above and gently pushed on to the stop.
Important!
Do not apply any unnecessary force or unsu-
itable tools and observe the rotating direction
of the motors at all times when replacing the
propellers (see bottom figure in figure 16)!
Figure 16
49