Care & Cleaning; Service & Customer Care - Kenwood FP580 serie Benutzerhandbuch

to use the cutting discs
1 Fit the drive shaft and bowl onto the power unit.
k d
2 Holding by the centre grip , place the disc onto the
drive shaft with the appropriate side uppermost
3 Fit the lid.
4 Choose which size feed tube you want to use. The
pusher contains a smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube - first put the large pusher
inside the feed tube.
To use the large feed tube - use both pushers
together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
hints
Use fresh ingredients
Don't cut food too small. Fill the width of the large feed tube fairly full. This
prevents the food from slipping sideways during processing. Alternatively use
the small feed tube.
When using the chipper disc, place ingredients horizontally.
When slicing or shredding: food placed upright
k g
placed horizontally .
There will always be a small amount of waste on the plate or in the bowl after
processing.
k f
k
citrus press
26
Use the citrus press to squeeze the juice
from citrus fruits (eg oranges, lemons, limes
and grapefruits).
cone
sieve
to use the citrus press
1 Fit the drive shaft and bowl onto the power
unit.
2 Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over
k h
the bowl handle .
3 Place the cone over the drive shaft turning
k i
until it drops all the way down
4 Cut the fruit in half. Then switch on and
press the fruit onto the cone.
The citrus press will not operate if
the sieve is not locked correctly.
k e
k e
.
k f
comes out shorter than food
k g
.
care & cleaning
Always switch off and unplug before cleaning.
k d
Handle the blades and cutting discs with care - they are
extremely sharp.
FP580 only - store your slicing/shredding discs in the
storage box supplied k.
Some foods may discolour the plastic. This is perfectly
normal and won't harm the plastic or affect the flavour of
your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food
debris.
Store excess cord in the storage area at the back of the machine.
liquidiser
1 Empty the jug before unscrewing it from the blade unit.
2 Wash the jug by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot soapy water, then
rinse thoroughly under the tap. Don't immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them free. Wash in
warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not immerse the
drive head in water.
all other parts
Wash by hand, then dry.
Alternatively they can be washed on the top rack of your dishwasher.
service & customer care
If the cord is damaged it must, for safety reasons, be replaced by Kenwood or
an authorised Kenwood repairer.
If you need help with:
Using your machine
Servicing or repairs
Contact the shop where you brought the food processor.
k i
k h
4
28
k
28