Intended Use; Delivery Content - Renkforce DL-PAR101 LED-Spot 77 LEDs Bedienungsanleitung

2. Intended use

The LED Spot is used to generate light effects for light shows or party rooms and is controlled by the built-in
controller or an external DMX controller. This product is only approved for connection to a 100-240 V/AC,
50/60 Hz alternating current and is only for use with an earthed mains socket. The DMX connection must
only be connected to suitable DMX controllers or other DMX devices with a DMX connection.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
A list of all features and functions can be found in chapter 5. Features and functions.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
Observe all safety and assembly information in these operating instructions!

3. Delivery content

• LED spot
• Mains cable
• Remote control with battery type CR2025
• 2 x mounting bracket
• 2 x set screw
• Operating instructions
32