Renkforce DL-PAR101 LED-Spot 77 LEDs Bedienungsanleitung Seite 46

Sound-to-light mode
• Press the MODE button until "Soxx" appears. Select a sound-to-light mode using the UP or DOWN
buttons. You can select a mode from the DMX numbers 01-27.
• Press the SET UP button until "SPxx" appears. Select a strobe speed using the UP or DOWN buttons. You
can select a strobe speed when a mode from the DMX numbers 21-27 is selected.
Automatic mode
• Press the MODE button until "Auxx" appears. Select an automatic mode using the UP or DOWN buttons.
• Press the SET UP button until "SPxx" appears. Select an operating speed using the UP or DOWN buttons.
Colour change with fade effects
• Press the MODE button until "FAxx" appears. Select a fade effect using the UP or DOWN buttons. You can
choose from 10 effects.
• Press the SET UP button until "SPxx" appears. Select a speed using the UP or DOWN buttons.
Coloured strobe effects
• Press the MODE button until "Coxx" appears. Select a strobe colour using the UP or DOWN buttons. You
can choose from 32 colours. Only 26 colours are available in DMX mode.
• Press the SET UP button until "FSxx" appears. Select a strobe speed using the UP or DOWN buttons. You
can choose from 16 speeds.
Manual colour setting
• Press the MODE button until "rxxx" appears. Select the brightness using the UP or DOWN buttons. You
can set the brightness in 255 levels.
• Press the SET UP button until "Gxxx" or "bxxx" appears. Set the brightness for each individual colour using
the UP or DOWN buttons.
• The "FSxx" strobe speed setting under the "r" menu corresponds to the strobe speed setting in the "Co"
menu as described in the "Coloured strobe effects" section (see "Menu overview").
Stand-alone mode and using as a master device
• Switch to automatic mode (AU on display), sound-to-light mode (So on display), colour change with fade
effects (FA on display), colourful strobe effects (Co on display), the manual colour setting (r on display) or
the desired option for the selected operating mode.
• The device is automatically set in stand-alone mode / as the master device when it is used in these
operating modes.
Slave mode
• Switch to DMX mode (A on display).
• Set another DMX starting address for each slave device in a chain. In a master-slave chain, only one
device may be assigned as the master device. All other devices must be set as slave devices. A maximum
of 29 slave devices can be operated together in a chain.
46