Intended Use; Explanation Of Symbols - Renkforce 1435563 Bedienungsanleitung

3. Intended Use

The LED moving head is used to generate light effects in light show equipment, party rooms, etc. and is controlled by
the built-in controller or an external DMX controller.
This product is only approved for connection to 100-240 V/AC, 50/60 Hz alternating current and only for use with an
earthed mains socket.
The DMX connections must only be connected to suitable DMX controllers or other DMX devices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For reasons of safety, you must not convert and/or change the product. Using the product for any other purposes than
those described above may damage the product. Improper use also may cause dangers such as short circuit, fire,
electric shock, etc. Read the operating instructions precisely and keep them. Only pass the product on to any third
parties together with the operating instructions.
This product complies with the statutory national and European requirements. All company names and product names
are trademarks of their respective owners. All rights reserved.

4. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric shock.
The device contains no parts that require servicing by the user. Therefore, never open the device.
The exclamation mark indicates important notes in these operating instructions that must be strictly
observed.
This symbol on the device indicates that the user must read these operating instructions before using the
product and observe them during operation.
The arrow symbol indicates special advice and operating information.
This symbol indicates the minimum distance to the illuminated surfaces.
This symbol with the house informs the user that the device must only be used in enclosed rooms.
22