Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
DMX LED effect spotlight SS-TE-002
Item no. 1599538
Intended use
This LED spotlight is designed to generate light effects in light show systems and party rooms.
It can be controlled using the integrated controller or an external DMX controller. The power
adapter is only approved for connection to a 100 –240 V/AC, 50/60 Hz alternating current.
The LED spotlight must be powered by the power adapter provided using an input voltage of
12 V/DC. The DMX connection must only be connected to suitable DMX controllers.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit or fire. Read the instructions carefully
and store them in a safe place. Only make this product available to third parties together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Observe all the safety instructions and installation notes in these operating
instructions.
Package contents
• LED spotlight
• 4x screws
• 4x dowels
• Power adapter
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Features
• 6 powerful 2 W LEDs
• LED display for easy use and operation
• Stand-alone mode, master-slave mode and DMX mode
• 7-channel DMX mode
• 7 automatic programs
• Sound-to-light mode with 2 different programs
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock. This product does not contain parts that need to be
serviced by the user, therefore do not attempt to open the device.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
This symbol tells the user to read these instructions carefully when configuring and
using the device.
This symbol indicates that this product is built according to protection class II. It is
equipped with reinforced or dual insulation between the mains circuit and the output
voltage.
Short-circuit proof safety transformer in accordance with EN61558-2-6 / EN61558-
2-17.
The symbol with the house indicates that the product may only be used in enclosed
rooms.
This symbol indicates the minimum distance to illuminated surfaces.
...m
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair
centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
• Warning, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!
b) Electrical safety
• The power adapter is built according to protection class II. Only connect the adapter plug to a
standard mains socket (230 V/AC, 50 Hz) connected to the public grid.
• Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect the power adapter if your hands are wet. This may cause a fatal
electric shock.
• Never disconnect the power adapter from the mains socket by pulling on the cable. Always
use the grips on the plug.
• When setting up the product, make sure that the cables are not pinched, kinked or damaged
by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Do not touch the power adapter if there are any signs of damage, as this may cause a fatal
electric shock! Switch off the mains voltage to the socket containing the mains adapter (switch
off at the corresponding circuit breaker or remove the safety fuse, and then switch off at
the corresponding RCD protective switch). You can then unplug the power adapter from the
mains socket. Dispose of the faulty power adapter in an environmentally friendly manner and
discontinue use.
• Replace it with a power adapter of the same design.
• Never place objects containing liquid (e.g. glasses, buckets, vases or plants) on or directly
next to the device. Liquids may come into contact with the interior components and impair the
electrical safety of the product. There is also the risk of a fire or a fatal electric shock. If the
product comes into contact with liquids, isolate the mains socket (e.g. switch off the circuit
breaker and RCD), and then unplug the mains plug from the mains socket. Discontinue use
and take the product to a specialist repair centre.
c) Persons and product
• All people who use, install, mount or repair this spotlight must be suitably qualified and follow
the instructions.
• Never look directly into the spotlight when it is switched on. The bright flashes of light may
temporarily impair your vision. In addition, epileptic fits may be triggered in people who are
sensitive to such lights. This particularly applies to epileptics.
• Do not place open flames (such as burning candles) on or directly next to the device.
• Do not leave the product unattended when it is switched on.
• Only use the product in temperate climates. It is not suitable for use in tropical climates.
Werbung
Inhaltsverzeichnis
