Renkforce DL-PAR101 LED-Spot 77 LEDs Bedienungsanleitung Seite 51

• "- - - -" appears first on the LED display when remote controls are being paired with the LED spot. Then
the remote controls that have been paired and detected are indicated on the LED by their code numbers
"1111", "2222", "3333", "4444" and "5555".
You can follow the settings on the LED display depending on your viewing angle.
Remote control buttons
Button Value on
display
--
A
S_A
Ch
S_C
So
Su
AU
Au
SP
Sp
FA
Fa
Co
Cl
FS
Sp
Function of the buttons on the IR remote control
Button Function
BLACKOUT
Turns the light on/off.
SOUND ACTIVE
Su
Activates the sound-to-light mode.
Use the +/- buttons to select the desired sound-to-light effect.
Use the SPEED button and the +/- buttons or the number buttons (0-9) to set the effect speed.
AUTO RUN
Au
Activates the automatic effects.
Use the +/- buttons to select the desired automatic effect (01-23).
Use the SPEED button and the +/- buttons or the number buttons (0-9) to set the effect speed.
Settings Function
-- Turn LEDs on/off (blackout)
Set the DMX starting address if the LED spot is operated
001-512
in a DMX chain.
1-7 Set the DMX channel
01-27 Sound-to-light mode
01-15 Select the automatic mode
01-99 Set the speed of the colour change
0-9 Colour change with 10 fading programs.
01-32 Set the light colours (manual)
00-15 Set the strobe speed
51