VOLTCRAFT IR-1600 CAM Bedienungsanleitung Seite 43

Type-K
Here, the automatic display of an external type K thermocouple sensor can be switched on or off. Pushing the but-
ton "Enter" actuates the slider in the display.
I = enabled, o = disabled
When this function is activated, the thermocouple socket (15) is monitored. Once an external type K thermo
sensor is connected, the contact temperature appears in the display during the measurement as well. If no
sensor is connected, this function is automatically concealed.
Colour
Here, the number colour of the displayed parameters can be set. In the lower line, the RGB colour values are
displayed for information.
Possible set values are:
White, black, red, yellow, blue, green
Logs time
The menu field "Logs time" appears only in data logger mode. Here, the time for the measuring interval can be set.
Use the arrows to set the value. The button "Esc" saves the setting and closes the settings menu.
Possible set values are: 1 s - 60 s.
43