Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information; A) Persons / Product - VOLTCRAFT IRU 500-12 Bedienungsanleitung

Infrarot-thermometer mit uv-licht
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. Safety Information

Please read the operating instructions completely before commissioning the device. They contain
important information for correct operation.
The guarantee/warranty will expire if damage is incurred resulting from non-compliance with the
operating instructions! We do not assume any liability for consequential damage!
We do not assume any liability for damage to property or personal injury caused by improper use
or the failure to observe the safety instructions! In such cases, any warranty/guarantee will expire.

a) Persons / Product

• This device left the manufacturer's factory in safe and perfect condition.
• To maintain this condition and to ensure safe operation, the user must observe the safety information and
warning notes in these operating instructions.
• For safety and approval reasons (CE), unauthorised conversion and/or modification of the device are
not permitted.
• Consult an expert when in doubt as to the operation, safety or the connection of the device.
• Meters and accessories have no place in the hands of children. Therefore, be particularly careful when
children are present.
• Protect the product from extreme temperatures direct sunlight, high humidity, moisture, flammable gases,
vapours and solvents.
• Do not operate the meter in rooms or under unfavourable conditions where combustible gases, vapours
or dusts are or may be present.
• Avoid operation in direct proximity of strong magnetic or electromagnetic fields or transmission aerials.
This could affect the measurement.
• Steam, dust, smoke and/or vapours may impair looks and lead to an incorrect measuring result!
• Attention laser and bright LED light source.
The following laser notes also apply to the white and UV LED light sources contained and must be
observed for these as well.
• When operating the laser device, always observe that the laser beam is guided so that no persons are
present in the projection area and that inadvertently reflected beams (e.g. by reflecting objects) cannot
reach the area where persons are present.
• Laser radiation may be dangerous if the laser beam or a reflection enters the unprotected eye. Therefore,
familiarise yourself with the statutory regulations and measures of precaution for the operation of this kind
of laser device before using the laser facility.
• Never look into the laser beam and never point it at people or animals. Laser radiation can seriously
damage your eyes.
• If a laser beam hits the eye, close your eyes deliberately and move your head from the beam at once.
• If your eyes have been irritated by the laser radiation, do not perform any safety-relevant work anymore,
such as work with machines, at heights or near high voltages. Do not operate any vehicles anymore until
the irritation has subsided.
26

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis