Safety Instructions - VOLTCRAFT IR-2200-50D USB Bedienungsanleitung

5.

SAFETy INSTRUCTIONS

The warranty will be void if damage is incurred resulting from non-compliance
with these operating instructions! We do not assume any liability for
consequential damage and for damage to property and injury to persons caused
by unprofessional use or non-compliance with the safety instructions! The
exclamation mark indicates important notes in these operating instructions that
should strictly be observed. The unauthorized conversion and/or modification of
the product is inadmissible for safety and approval reasons (CE).
Persons / Product
• The device must not be subjected to heavy mechanical stress or strong vibrations.
• The device must not be exposed to electromagnetic fields, extreme temperatures, direct sunlight
or moisture.
• The device must not be exposed to high humidity or fluids. When used outdoors, the device may
only be used in appropriate weather conditions or with proper protection.
• Steam, dust, smoke and/or vapours can impair the optical characteristics of the thermometer and
lead to false measuring results.
• The device should not be operated immediately after it has been taken from a cold to a warm
environment. Condensation may destroy the device. If the lens is steamed up, measured results
can be faulty. Allow the product to adapt to the ambient temperature before using it.
• If you have any reason to believe that safe operation is no longer possible, switch off the device
and secure it against inadvertent operation. Reasons to assume that safe operation is no longer
possible are the following:
- the product shows visible damage,
- the device no longer functions, or
- the product was stored under unfavourable conditions for an extended period of time,
- the product was exposed to heavy stress during transport.
• The product is not a toy. Keep it away from children and pets!
• On industrial sites the accident prevention regulations of the association of the industrial workers'
society for electrical equipment and utilities must be adhered to.
• In schools, training facilities, hobby and selfhelp-workshops, the operation of electric devices is to
be supervised by trained personnel.
Laser
• When operating the laser equipment, always make sure that the laser beam is directed so that no
one is in the projection area and that unintentionally reflected beams (e.g., from reflective objects)
cannot be directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its reflection enters unprotected eyes.
Therefore, before using the laser equipment, familiarise yourself with the statutory regulations and
instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser radiation can
seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your head away from
the beam.
21