Werbung
Sonde de température platine PT-100
Type de sonde .......................Sonde de résistance platine PT-100
Raccordement .......................Technique à 4 conducteurs
Précision ................................± (0,15 °C + 0,002 t*), IEC751, classe A
Plage de mesure ....................de -50 °C à +400 °C
Ø sonde .................................3,2 mm
Longueur de la sonde ............120 mm
Longueur du câble .................1 100 mm
* t = température mesurée
54
A wide range of measurement tasks can be carried out with this
professional measurement instrument. The thermometer can be
calibrated.
Operation requires 3 x 1.5 mignon cells (AAA), which are included in
the delivery.
The ambient conditions specified in the technical data section must
be fulfilled to ensure correct measurement. The specified tempera-
ture limits for the sensor and measurement instrument must not be
exceeded. It may only be used on/in materials which are not electri-
cally live.
This is a class A device. This device may cause interference if used in
the home. In this case, the operator may be requested to take appro-
priate measures.
Use other than that described above will lead to damage to the
product.
No part of the product may be modified or converted.
The safety instructions must be observed.
Safety instructions
Please read through the operating instructions com-
pletely before using the product for the first time; they
include important information necessary for correct
operation.
The guarantee will be rendered null and void if damage
is incurred as a result of failure to observe the operating
instructions. We will not assume any responsibility for
consequential damage.
We do not accept any liability for personal injury or damage to prop-
erty caused by incorrect handling or failure to observe the safety
instructions. The warranty will lapse in these cases.
23
Werbung
Kapitel
Fehlerbehebung
