Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
IR 500-12D IR thermometer
Item no. 1599563
Intended use
The product is used for contact-free measurement of surface temperatures. The infrared
sensor detects the emitted heat radiation of an object, and converts this information into a
temperature value. A 9 V block battery supplies the power.
The product is suitable only for use in dry environments.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause injuries. Read the instructions carefully and store them in a safe place.
Only make this product available to third parties together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• IR thermometer
• 9 V monobloc battery
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on how to use the
product.
Safety information
Read the operating instructions and safety information carefully. If you do not
follow the safety information and information on proper handling in these
operating instruction, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always comply with the accident prevention regulations for electrical equipment
when using the product in commercial facilities.
• Trained personnel must supervise the use of electrical appliances in schools,
training facilities and DIY workshops.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Laser
• When operating the laser equipment, always make sure that the laser beam is
directed so that no one is in the projection area and that unintentionally reflected
beams (e.g. from reflective objects) cannot be directed into areas where people
are present.
• Laser radiation can be dangerous, if the laser beam or its reflection enters
unprotected eyes. Before using the thermometer, familiarise yourself with the
statutory regulations and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser
radiation can seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your
head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out
tasks with safety implications, such as working with machines, working from great
heights or close to high voltage. Do not drive any vehicles until the irritation has
completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled,
reflected beam may strike people or animals.
• Never open the device. Configuration or maintenance tasks must only be
completed by a trained specialist who is familiar with the potential hazards.
Improperly executed adjustments might result in dangerous laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages
are included in the package. If the sign on the laser is not in your local language,
attach the appropriate sign to the laser.
• Caution: Using equipment or procedures other than those described in these
instructions could lead to exposure to dangerous radiation.
c) Battery
• To prevent battery leakage, remove the battery if you do not plan to use the
product for an extended period. Leaking or damaged batteries may cause acid
burns when they come into contact with skin. Always use protective gloves when
handling damaged batteries.
• Keep batteries out of the reach of children. Do not leave batteries lying around, as
they constitute a choking hazard for children and pets.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. Danger of explosion!
Product overview
1
2
3
4
1 ▲ button
2 Laser button
3 ▼ button
4 SET button
5
6
5
7
8
5 Laser outlet
6 Infrared sensor
7 Measuring button
8 Battery compartment cover
Werbung
Inhaltsverzeichnis
