Kärcher KM 150/500 R D Classic Betriebsanleitung Seite 28

Check coolant level
1 Coolant expansion tank
 Check filling level while the motor is
cold.
 Check the filling level in the coolant ex-
pansion tank.
The correct coolant level is between the
upper and the lower marking.
Replacing fuses
 Unscrew the knurled nut.
 Open the cover on the fuse box.
 Check the fuses.
 Replace defective fuses.
Note: Only use fuses with identical
safety ratings.
Note: The fuse FU 01 is located in the en-
gine compartment.
FU 01 Main fuse
FU 02 Horn
Hydraulic oil cooler
FU 03 Safety relay
Multifunction display
FU 04 Beacon lamp
FU 05 Safety relay
Time delay
FU 06 Cabin lighting
Wiper
FU 07 Fuel pump
28
FU 08 Time relay
Seat contact switch
FU 09 Left lighting
FU 10 Right lighting
FU 11 Front work lights (low
beam)
FU 12 Vibrator system
FU 13 Backup signal
60 A
20 A
10 A
5 A
25 A
10 A
10 A
3 A
7,5 A
7,5 A
10 A
20 A
5 A
12
EN
-