Technical Data; Notes On Safety; Symbols; Symbols In The Manual - Parkside IAN 287977 Originalbetriebsanleitung

GB IE

Technical Data

3-in-1 multi-purpose sander .. PMFS 200 B2
Rated input voltage
(U) .......................... 230-240 V~, 50 Hz
Power input (P) .............................200 W
Idling speed (n ) ...........7000-12000 min
0
Oscillation rate (n) ......14000-24000 min
Weight (without sander disc and
dust collection box) .....................1.38 kg
Protection class .................................
Protection category...........................IP20
Sound pressure level
(L ) ......................79 dB(A); K
pA
Sound power level
(L ) .................... 90 dB(A); K
WA
Vibration
(a ) ................ 13.7 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
22
-1
-1
II
= 3 dB
pA
= 3 dB
WA
; K = 1.5 m/s
2 2
h

Notes on Safety

This section details the basic safety instruc-
tions for working with the appliance.

Symbols

Symbols in the manual:

Warning symbols with infor-
mation on damage and injury
prevention.
Hazard symbol with informa-
tion on the prevention of per-
sonal injury caused by electric
shock.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

Symbols on the Equipment:

Warning!
Risk of electric shock!
Disconnect from the mains before
carrying out maintenance and re-
pair work.
Injury hazard caused by rotating
tool! Keep hands away.
Read through the instruction manual
carefully.
Wear ear protection.
Wear eye protection.