Herunterladen Diese Seite drucken

Product Care; Rimozione Del Rivestimento - CYBEX PALLAS-FIX Handbuch

Vorschau ausblenden Andere Handbücher für PALLAS-FIX:

Werbung

ProDuCt CAre

in order to guarantee the best possible protection of your child seat, it is necessary
that you take note of the following:
– all important parts of the child seat should be examined for any damages on a
regular basis. the mechanical parts must function flawlessly.
– it is essential that the child seat does not get jammed between hard objects e.g.
like the door of the car, seat rail etc. causing possible damage to the seat.
– the child seat must be examined by the manufacturer after a fall or similar
situations.
remoVinG the SeAt CoVer
the seat cover consists of four parts which are fixed to the seat either by velcros, press
buttons or button holes. once you have released all fixations, the cover parts can
be removed.
in order to put the covers back on the seat, proceed in the reversed order as
removing them.
Warning! the child seat must never be used without the cover.
remoVinG the SeAt CoVer from the bACKreSt
1. Pull the headrest (e) into its top position by using the release handle (h).
2. to release the headrest (e), simultaneously pull the handle (h) and the lower rim
of the upper rib of the backrest (a). now the headrest (e) can be completely
detached.
3. now the cover can be removed.
4. to reassemble, pull the adjustment handle (h) and insert the headrest (e) into the
backrest (a).
CLeAninG
it is important to use only original cYbeX seat cover since the cover is also an essential
part of the function. You may obtain spare covers at your retailer.
note! Please wash the cover before using it the first time. seat covers are machine
washable at max. 30°c on delicate cycle. if you wash it at a higher temperature,
the cover fabric may lose colour. Please wash the cover separately and never dry it
mechanically! Do not dry the cover in direct sunlight! You can clean the plastic parts
with a mild detergent and warm water.
Warning! Please do not use chemical detergents or bleaching agents under any
circumstances!
mAnutenzione
Per garantire i massimi standard di sicurezza del seggiolino è necessario prendere
nota dei seguenti accorgimenti:
– tutte le parti importanti del seggiolino di sicurezza per auto devono essere
sottoposte ad un regolare controllo per verificare eventuali danni. le parti
meccaniche devono funzionare correttamente.
– e' essenziale che il seggiolino non venga danneggiato a causa di un eventuale
schiacciamento tra il sedile dell'auto e la porta o da altri ostacoli solidi.
– il seggiolino dovrà essere inviato al produttore per un controllo in caso di caduta
o altri eventi similari.

rimozione DeL riVeStimento

il rivestimento è costituito da quattro parti unite al seggiolino tramite strisce di velcro,
bottoni a pressione o bottoni ad asola. una volta sganciati tutti i punti di fissaggio, le
parti del rivestimento possono essere rimosse.
Attenzione! mAi utilizzare il seggiolino senza il rivestimento.
rimozione DeL riVeStimento SChienALe
1. sollevare l'appoggiatesta (e) fino al punto di massima estensione usando la
maniglia di sblocco (h).
2. Per sganciare l'appoggiatesta (e) tirare contemporaneamente la maniglia
(h) e il lembo inferiore della copertura dello schienale (a). a questo punto
l'appoggiatesta (e) può essere staccato.
3. e il rivestimento tolto.
4. Per il rimontaggio tirare la maniglia di regolazione (h) ed inserire l'appoggiatesta
(e) nello schienale (a).
PuLiziA
il rivestimento è una parte essenziale per il funzionamento del seggiolino ed è
indispensabile utilizzare soltanto rivestimenti originali cYbeX. rivestimenti di ricambio
originali sono disponibili presso i rivenditori autorizzati.
nota bene! e' consigliato il lavaggio prima del primo utilizzo. i rivestimenti sono lavabili
in lavatrice ciclo delicato max 30°. il lavaggio a temperature superiori può provocare
lo scolorimento dei tessuti. raccomandiamo di lavare separatamente e di non
asciugare meccanicamente!! non asciugare alla luce diretta del sole! le parti in
plastica possono essere lavate con detergente neutro e acqua tiepida.
Attenzione! non usare mai prodotti chimici o sbiancanti per la pulizia!
24

Werbung

Kapitel

loading

Diese Anleitung auch für:

Solution x-fix