Power Failure; Cleaning - Gram Gastro 07 Bedienungsanleitung

Fig. 6

Power failure

In the event of a power failure, the control remembers the temperature setting and restarts
the counter when power is restored. If the power failure persists for some time, the control
might revert to the factory setting.

Cleaning

Insufficient cleaning will cause that the counter will not work at optimum perfomance, or
eventually it will be defective.
Before cleaning, the counter should always be disconnected.
Do not flush the counter with water, do not use water jet or steam hose
as this may cause short-circuits in the electrical system.
Cleansing agents containing chlorine or compounds of chlorine as well
as other corrosive means, are not to be used , as they might cause
corrosion to the stainless panels of the cabinet and the evaporator.
The compressor compartment and in particular the condenser must be kept free
from dust and dirt. This is best done with a vacuum cleaner and a brush.
The air filters on the condenser and the front panel can be removed and cleaned in
a dishwasher at max. 50°C.
For the external maintenance – use stainless steel polish.
The counter should be cleaned internally with a mild soap solution at suitable
intervals and checked thoroughly before it is put into operation again.
765041480 Rev. 000 41