Storage; Waste Disposal And Environmental Protection; Spare Parts/Accessories - FLORABEST FHT 600 D3 Originalbetriebsanleitung

GB IE
• Keep the ventilation slots (
motor housing of the device clean. Use
a damp cloth or a brush to do this. Do
not wash down the equipment with wa-
ter, or submerge it in water.
Clean the cutter bar (2) carefully af-
ter each use. After using the equip-
ment, it is imperative to:
- Clean the blade (with an oily cloth);
- Oil the blade shaft with an oil can
or spray.

Storage

• Clean the equipment before putting it
away.
• Keep the trimmer in the blade protec-
tion ( 10) supplied, in a dry place
and out of reach of children.
• In order to hang up the device directly
without blade protection (
is a drill hole in the impact protection
( 1).

Spare Parts/Accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone (see
"Service-Center" Page 15). Please have the order number mentioned below ready.
Position Position
instruction exploded
manual drawing
2 31
3 24+25
67-69
12
Waste Disposal and En-
5) and
vironmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be dis-
posed of for free.
10), there
www.grizzly-service.eu
Description
Cutter bar
Hand protection
Carbon brushes + support
Electrical machines do not belong
in domestic waste.
Order No.
91102923
91102921
91102922