What To Do If - AEG BE8615001 Benutzerinformation

13. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
Problem
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The display shows
an error code that is
not in this list.
Steam and conden-
sation settle on the
food and in the ap-
pliance.
The display shows
F111.
The lamp does not
operate.
Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The Child Lock is activated. Refer to "Deactivating the
The fuse is released.
The automatic switch-off is
activated.
There is an electrical fault.
You left the dish in the ap-
pliance for too long.
The CT Sensor plug is not
correctly installed into the
socket.
The lamp is defective.
ENGLISH
Remedy
Activate the appliance.
Set the clock.
Make sure that the settings
are correct.
Child Lock".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact an
authorized electrician.
Refer to „Automatic
switch-off".
• Deactivate the appliance
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Do not keep the dishes in
the appliance for longer
than 15 — 20 minutes after
the cooking ends.
Put the plug of core tem-
perature sensor as far as
possible into the socket.
Replace the lamp.
31