Troubleshooting; What To Do If - AEG BSE77280M Benutzerinformation

Side lamp
Step 1 Remove the left shelf support to get
access to the lamp.
Step 2 Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cov‐
er.
Step 3 Clean the glass cover.
Step 4 Replace the lamp with a suitable
300 °C heat-resistant lamp.
Step 5 Install the glass cover.
Step 6 Install the left shelf support.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

12.1 What to do if...

The appliance does not turn on or does not heat up
Possible cause
The appliance is not connected to an electrical
supply or it is connected incorrectly.
The clock is not set.
The door is not closed correctly.
The fuse is blown.
TROUBLESHOOTING
Remedy
Check if the appliance is correctly connected to
the electrical supply.
Set the clock, for details refer to Clock func‐
tions chapter, How to set: Clock functions.
Fully close the door.
Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a qualified
electrician.
115/336