Automatic Programmes - AEG BE8615001 Benutzerinformation

14 www.aeg.com
4.
Press
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function operates for
30 minutes.
The Heat + Hold function stays on if you
change the heating functions.
7.3 Extra Time
The Extra Time function makes the heat-
ing function continue after the Duration
ends.
• Applicable for all heating functions
with Duration or Weight Automatic.

8. AUTOMATIC PROGRAMMES

With some programmes turn
over the food after 30 minutes.
The display shows a reminder.
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you can-
not change them.
Activating the function:
1. Activate the appliance.
2. Select the Assisted Cooking menu.
Press OK to confirm.
3. Select the category and dish. Press
OK to confirm.
4.
Select Recipe Automatic . Press OK
to confirm.
When you use the Manual func-
tion, the appliance uses automat-
ic settings. You can change them
as with other functions.
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
again and again until the
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1. When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2. The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or
cel).
4. Set the length of the Extra Time .
Press OK to confirm.
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking . Press OK
to confirm.
3. Select the category and dish. Press
OK to confirm.
4. Select the Weight Automatic . Press
OK to confirm.
5.
Touch or
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press
or to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the sig-
nal.
to can-
to set the food