Troubleshooting; What To Do If - AEG BPE556360M Benutzerinformation

TROUBLESHOOTING

Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.

12.1 What to do if...

In any cases not included in this table please contact with an Authorised Service Centre.
The appliance does not turn on or does not heat up
Problem
You cannot activate or operate the appliance.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
178/780
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if...
The appliance is correctly connected to an
electrical supply.
The automatic switch-off is deactivated.
The appliance door is closed.
The fuse is not blown.
Step 3
Put a cloth on the bottom of
the cavity.