Installation - AEG BE8615001 Benutzerinformation

32 www.aeg.com
Problem
The display shows
"Demo". The appli-
ance does not heat
up. The fan does
not operate.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to the Safety chapters.
14.1 Building In
573
The test mode is activated.
548
558
594
5
Possible cause
on the front frame of the appliance cavi-
ty.
20
589
Remedy
1. Deactivate the appli-
ance.
2.
Touch and hold
til the appliance acti-
vates and deactivates.
The sensor field is illu-
minated.
3.
Touch and hold
at the same time
until an acoustic signal
sounds and the sensor
field is off. "Demo"
goes out.
.........................................
.........................................
.........................................
min. 550
20
590
min. 560
un-
and