Maintenance - Handicare Kombi tilt Gebrauchsanweisung

MAINTENANCE

To be wiped clean after use. Clean the Combi Chair with domestic cleaning materials without abrasive or corrosive properties. Solvents and chlorine
should not be applied.
Seat and backrest can be detached for cleaning purposes. The polyurethane material can tolerate temperatures of up to 70ºC. Make sure to reattach all
removed parts correctly. The bucket holder is easily cleaned when removed.
CAUTION

Max. load: 150 kg. / 330 lbs

When the Combi Tilt Chair is not used for transportation purposes or in the tilting function, all four castors must be locked.

The backrest must only be removed if the chair is being transported without the patient. The chair must not be tilted if the backrest is
removed.

The chair must only be tilted by the caregiver and not by the user.

Armrests: Caution must be exercised when folding up the armrests as there is a risk of ones' fingers getting caught between the upright
frame tubing of the backrest and the upright telescope tubing of the armrest.

Check the condition of the snaplocks frequently. Regularly check that the snaplocks are inserted correctly into the tubing.

If the castors are removed for any reason or if the chair is height adjusted it is important that the castors are correctly mounted again and
the snaplocks properly inserted. Make sure the red dots are facing outwards / the front of the wheel.

When removing the bucket frame, follow the instructions as stated in " Assembly"

Regularly check that the cable to the gas piston has the correct tension.