Herunterladen Inhalt Inhalt Diese Seite drucken

Filling The Water Tank; Use - Cleanmaxx jj-sc-005b Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für jj-sc-005b:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Filling the water tank

ATTENTION!
Always turn off the device before you fi ll the water tank.
Never fi ll the device with cleaners or other additives. They may irreparably damage
the device and as such, the safe operation of the device can no longer be assured.
If the power LEDs (12) are blinking red, the water tank (7) is empty and has
to be fi lled.
We recommend that, ideally, you fi ll the water tank with distilled water to
prevent calcifi cation, especially if the hardness of your tap water is very high.
1. Take the water tank out of the device to fi ll it. To do so, depress both side release
buttons (6).
2. Open the water tank: Turn the water tank lid (5) a bit in a counterclockwise direction
and remove it.

Use

ATTENTION!
Scalding hazard! Never point the steam towards people, animals, plants or equip-
ment containing electric components (e. g. stereo systems, televisions, switches,
lights, microwave devices etc.).
Scalding hazard! Only hold the device by the handle during operation.
Scalding hazard! After deactivating the device, hot steam is emitted for a few seconds!
Even after the device has cooled off, the water in the tank is still hot! Be careful!
Always shut off the device and pull the mains plug out of the socket before you re-
move the fl oor pad or change the nozzle.
ATTENTION! Scalding hazard! The fl oor pad / nozzle may be very hot during and
shortly after use. For this reason, wait a few minutes for the cloth / nozzle to cool off
completely before you remove it.
25
To clean carpets, place the carpet cleaning head (M) fl at
on the fl oor and place the cleaning head with the fl oor pad
in the carpet cleaning head.
3. Fill the tank with cold, clean water. You can use the en-
closed measuring cup (J) to do so. The tank holds up to
350 ml.
4. Screw the water tank lid back onto the water tank by turn-
ing it in a clockwise direction and then insert the tank back
into the main unit. It must audibly lock into place.
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis