Cleanmaxx jj-sc-005b Gebrauchsanleitung Seite 23

EN
Attaching / removing the cleaning head
Attaching / removing nozzles
If you would like to use one of the other enclosed nozzles, it must fi rst be attached to
the nozzle adapter (F):
3. The nozzle adapter will be attached to the main unit in the exact same manner as the
cleaning head: Insert it in the steam nozzle until the catch audibly locks into place.
4. To remove the nozzle adapter, depress the catch and pull the adapter out at the
same time.
Attaching the fl oor pad and carpet cleaning head
24
4. To remove the handle bar depress the release button (14)
and pull the handle bar out at the same time.
5. Turn the top hook for winding up the cord (2) up and the
bottom one down and wind the power cord around both
hooks.
In order to quickly unwind the power cord again, turn the
top hook of the cord spool down.
1. Insert the end piece of the cleaning head (L) in the steam
nozzle (9) of the main unit until the catch locks into the
opening next to the steam nozzle.
2. To remove the cleaning head, depress the catch and pull
the cleaning head out at the same time.
1. An arrow is embossed on the end piece of the nozzle and
the nozzle adapter. Connect the two parts so that the ar-
rows are pointing towards one another and then turn the
nozzle to the stop.
2. To remove the nozzle, turn it back until the arrows on the
nozzle and adapter are pointing towards one another and
pull it out.
• The fl oor pad (K) is attached to the cleaning head with
Velcro straps. Place it on the cleaning head and push it
fi rmly. After use, simply pull it off of the cleaning head.