Water Tank; Water Fi Lter; Floor Cleaning Cloth; Storage - Cleanmaxx Premium Gebrauchsanleitung

Water tank

1. Remove the water tank by pulling it upwards out of the device.
2. Check if the joint rings on the tank cap are correctly installed. They have to
close with the cut-outs. If they are damaged or leaky, replace them with the
large joint rings included in the package.
3. Firmly push the tank on the water fi lter
Water fi lter
The water fi lter can be changed. The lifespan of the Long-Life-Filter depends on the hardness
degree of your water. We recommend to use distilled water and to change the fi lter regularly.
Replacement fi lters can be ordered at our customer service (see section "Customer service").
1. Remove the water tank by pulling it upwards out of the device. Now you can remove the
water fi lter.
2. Check if the joint ring around the fi lter's outlet is correctly installed in the cut-out. If the joint
ring is damaged or leaky, replace it with the small joint ring included in the package.
3. Put the water tank and the water fi lter back into the device. Check if the tank fi ts correctly
on the fi lter. Push fi rmly!
It's possible that the new joint rings need to adapt to the form of the cut-outs. Wait
approx. 3 hours after the assembly.

Floor cleaning cloth

The fl oor cleaning cloth can be washed in the washing machine. The steam cleaner should be
exclusively operated with fl oor cleaning clothes and fi lters produced especially for this device.

Storage

❐ Always allow the device to cool down and empty the water before storing it in a
safe place.
❐ Don't expose the device to extreme insolation or atmospheric exposure such as
rain, freeze etc.
❐ Store the device in a cool, dry place.
00708_DE-GB-FR-NL_V6.indb 21 00708_DE-GB-FR-NL_V6.indb 21
21
05.11.10 11:02 05.11.10 11:02