Before Fi Rst Use; Unpacking; Start-Up; Filling The Water Tank - Cleanmaxx Z 04997 Gebrauchsanleitung

Before fi rst use
Before you can use the device, you must:
• unpack the product contents,
• observe the notes in the chapters "Start-up" and "Use".

Unpacking

ATTENTION!
❐ Keep children away from the packaging. Risk of suffocation and other dangers!
Unpack all parts and make sure that the scope of delivery is complete (see chapter "Device over-
view and scope of delivery") and check for any damages from transport. If you identify damages
to the components, do not use them (!), instead contact our customer service centre.

Start-up

Filling the water tank

ATTENTION!
❐ Always switch off the device, disconnect the mains plug from the socket and let it cool off
before twisting off the water tank cap and fi lling the tank with water! In the process, never
pull on the cable, but always on the plug.
❐ Do not overfi ll the water tank! The water tank has a capacity of approximately 0.9 litres!
❐ Only use tap water or distilled water! Never add cleaners or other chemical additives
to the water tank. They may irreparably damage the device and as such, the safe operation
of the device can no longer be assured.
1. Open the water tank cap by pushing it down and at the same time turning it counter-clock-
wise.
2. Place the funnel in the water tank opening and fi ll the water tank using the enclosed meas-
uring cup. Please keep in mind that the capacity of the water tank amounts to approximately
0.9 litres!
3. Close the water tank by turning the water tank cap clockwise.
Attaching a fl oor nozzle
1. Connect the adapter and the fl oor nozzle.
2. Stick the two parts of the extension tube together.
3. Stick one end on the steam gun.
4. Stick the fl oor nozzle with the adapter on the other end of the
extension hose.
22