Technical Data; Technical Data Gemü - Gemü 613 Montageanleitung

6

Technical data

6.1 Technical data GEMÜ 613
Working medium
Corrosive, inert, gaseous and liquid media which have no
negative impact on the physical and chemical properties of
the body and diaphragm material.
Working medium temperature
Valve body PVC-U
Valve body PP
Valve body PVDF
The permissible operating pressure depends on the working
medium temperature
Ambient temperature
Valve body PVC-U
Valve body PP
Valve body PVDF
Electrical data
Power supply
Power consumption
Rating
Electrical connection
(functional module versions AE, AP)
2 x round connector (Binder series 717)
(functional module versions E1, E2, E3)
Temperature in °C
(plastic body)
Valve body material
PVC-U Code 1
PP Code 5
PVDF Code 20
Data for extended temperature ranges on request. Please note that the ambient temperature and medium temperature generate a combined
temperature at the valve body which must not exceed the above values.
Diaphragm
size
10
All pressures are given as gauge pressures, when applied upstream only.
Kv values determined acc. to DIN EN 60534, inlet pressure 5 bar, ∆p 1 bar, PVC-U valve body and soft elastomer diaphragm.
The Kv values for other product configurations (e.g. other diaphragm or body materials) may differ. In general, all diaphragms are subject to
the influences of pressure, temperature, the process and their tightening torques. Therefore the Kv values may exceed the tolerance limits of
the standard.
10 to 60 °C
5 to 80 °C
-20 to 80 °C
10 to 50 °C
5 to 50 °C
-10 to 50 °C
Uv = 24 V 50/60 Hz ± 10 %
Uv = 120 V 50/60 Hz ± 10 %
Uv = 230 V 50/60 Hz ± 10 %
3.5 VA
Continuously rated
2 x PG 13.5
Pressure / temperature correlation for plastic
-20 -10 ±0
- - -
- - -
6.0 6.0 6.0
Nominal size
[DN]
12
15
Protection class
IP 65 acc. to DIN 40050
Operating time
See actuator version (see chapter 7.1)
approx. 17 or 45 s
O-ring material for valve bodies
Diaphragm material
NBR
FPM
EPDM
PTFE
Other combinations on request
5 10 20 25
Permissible operating pressure in bar
- 6.0 6.0 6.0
6.0 6.0 6.0 6.0
6.0 6.0 6.0 6.0
Operating Kv value
pressure
[bar] ISO connection
0 - 6
0 - 6
35 / 64
with union ends
O-ring material
EPDM
FPM
EPDM
FPM
30 40 50 60
4.8 3.6 2.1 0.9
5.1 4.2 3.3 2.4
5.4 4.8 4.3 3.8
Weight
[m³/h]
2.8
3.5
613, 618
70 80
- -
1.6 0.9
3.2 2.8
[g]
1000
1050