Image Settings - Trotec IC 0120 V Bedienungsanleitung

3. Setting Level and
Span.
• Press the 3 Left or
Right 4arrow on the
omni selector to
select a new field.
• Press the Up or Down arrow on the omni
selector to set the values.
4. After this operation, press the MENU / ENTER key to
save changes, or press the C key to close the menu
window without saving.

Image Settings

1. Press the MENU / EN-
TER key.
2. Press 3Left or Right 4
arrow on the omni se-
lector to select the
[Setup] menu, then
Press the MENU /
ENTER key.
3. Press the Up or
Down arrow on the
omni selector to select
[Other], then press the
MENU / ENTER key.
4. Set the Image Settings.
• Press the Up or Down
selector to select a new field.
• Press the 3 Left or Right 4 arrow on the omni
selector to set the values.
5. After this operation, press the MENU / ENTER key to
save changes, or press the C key to close the menu
window without saving.
About the Image Settings:
• Palette
Sets the pseudo colors of the thermal image. The ca-
mera provides 6 palettes: Iron, Iron inverted, Rainbow,
Feather, Grey and Grey inverted.
B - 11
arrow on the omni
Operating manual – Infrared camera
• Auto adjust
Sets the function of the A key. There are three options:
Level and Span, Level, Span.
- Level und Span
The camera will automatically adjust the level (bright-
ness) and span (contrast) of the image to the optimum
setting.
- Level
The camera will automatically adjust the level
(brightness) of the image.
- Span
The camera will automatically adjust the span
(contrast) of the image.
• Continuous adj
Sets whether the brightness and contrast of the
image shown on screen are adjusted automatically.
- Level and span
The brightness and contrast are adjusted automati-
cally.
- Level
The camera will automatically adjust the level
(brightness) of the image.
- None
The brightness and contrast will not be adjusted auto-
matically.
• Automatic shut-down function
The camera turns itself off automatically after a fixed
period.
• LCD display
The LCD display switches to sleep mode after a fixe
period.
The camera itself remains switched on.
• Shutter Speed
The shutter closes in prescribed intervals (short =
approx..each minute / long = approx. every 3 minu-
tes)
• File Name
automatically in ascending order.