Resetting The Settings To Default; Shooting; Focus - Trotec IC 0120 V Bedienungsanleitung

Resetting the Settings to Default

You can reset the menu and button operation settings
to default.
1. Turn off the IR camera.
2. Press and hold the Power
switch and C key for some
seconds until the camera
is switched on.
The data in storage will not be deleted when you
reset the menu and button operation settings to
default.
B - 9
on / off
Cancel
Operating manual – Infrared camera

05. SHOOTING

Manual Focus
1. Check that the IR camera is in null mode.
2. Aim the IR camera
at the subject.
3. Turn the focus ring to
focus on the target.
4. Do not stop turning
until the image is
clear.
Thermal, Visual and Duovision image display
This IR camera records visual images with its built-in
digital camera. You can capture a visual image as a refe-
rence as the thermal image.
1. Press the MENU/EN-
TER key.
2. Press the Up or
Down arrow on the
omni selector to select
the [Setup] menu.
3. Press Up and Down
arrow on the omni
selector to select [Lo-
cal], then press MENU /
ENTER key.
• A submenu will ap-
pear on the LCD mo-
nitor.