ECOLAB MULTRONIC Bedienungsanleitung Seite 57

417101804_Anhang03_pH.doc
pH Measuring Module
Item/designation
Tank-weld-on armature
Material: V2A (1.4301)
Installation position: pH-meas. chain at least 10° slopping
Manual armature for pH-measurement chains
(alternative)
The armature enables the sensor installation and
removal as the check or calibration without interruption of
the process-control.
Materials: stainless steel 1.4571/PP
Connection screw: 3/4"
Mounting: tank or container wall or in pipes
Installation: pH-measurement chain at least 10°
slopping
- 57 -
Material-No.
287505
on request
Rev.: 07-07/10