4
Start up
4.1
Configuration
The main menu for adjusting the Multronic can be accessed through operating the ↑-
key in the measuring mask.
Main menu
Select configuration through placing the cursor onto the selected function and operate
the ENTER key.
Configuration menu
Select module configuration through placing the cursor onto the selected item and
operate the ENTER key.
Configuration module
selection
(not available at
Multronic OC!)
The electrodeless C-measuring module that is to be configured can now be selected.
To do so, move the cursor onto the corresponding selected item and operate the
ENTER key.
The settings of the pH measuring module configuration are carried out on two pages.
pH configuration
page 1
The temperature unit function is used to select the temperature unit.
Value range: Celsius / Fahrenheit
417101804_Anhang03_pH.doc
pH Measuring Module
- 36 -
Rev.: 07-07/10