To Set Display Parameter; To Set The Brightness Of Screen; To Set The Separator - PeakTech 4125 Bedienungsanleitung

Tips:
Normally the frequency, amplitude, and offset of the recalled wave are the same as
the wave being cut.
The max data number of PeakTech
When the wave cut from oscilloscope contains data number more than 8192,
®
PeakTech 4125 will compress data. On the contrary if the data number is less than
8192, PeakTech
The max data number of PeakTech
oscilloscope contains data number more than 1000000, generator will compress data.
On the contrary if the data number is less than 1000000, generator will use linear
interpolation.

6. To Set Display Parameter

6.1. To Set the Brightness of Screen

1. Press Utility and choose Disp Setup, press F1 to select Bright.
2. Turn the knob to change the value, press
left and right; or press the number keys to input the desired value in percent, press
F4 to select the unit. The bright range is 0%～100%.

6.2. To Set the Separator

The user can set the separator of the displayed parameter.
1. Press Utility and choose Disp Setup, press F2 to select Sep.
2. Press F2 to switch between Comma, Space, Off.
Take the Frequency parameter for instance:
®
4125 will use linear interpolation.
Comma
Space
Off
®
4125 ARB is 8192.
®
4165 is 1.000.000. When the wave cut from
/ direction key to move the cursor
-93-