To Set The Baud Rate; To Set The System; Language Setting; Power On Setting - PeakTech 4125 Bedienungsanleitung

7.3. To Set the Baud Rate

Press Utility and choose Output Setup, press F4 to select BaudRate, press F4 to
switch the RS232 baud rate.
Make sure that the Baud Rate matches that of the computer. The optional rates are:
115.2K, 56K, 38.4K, 9.6K and 4.8K. The default setting is 115.2K.

8. To Set the System

8.1. Language Setting

Press Utility and choose System, press F1 to switch display languages.

8.2. Power On Setting

1. Press Utility and choose System, press F2 to select Power On.
2. Press F2 to switch between Default/Last. Default means that all the settings return
to default when powered. Last means that all the settings return to the last one when
powered.
-96-