5.1. To set channels
To Switch Channels for Display
Press CH1/2 button to switch channel displayed on the screen between CH1 and CH2.
To Display/Edit Both Channels
Press Both button to display the parameters of both channels.
To switch channel: Press CH1/2 to switch the editable channel.
To select waveform: Press Waveform selection buttons to select waveform of current
channel.
To select parameter: Press
Press it again to switch the current parameter such as Frequency/Period.
To edit parameter: Turn the knob to change the value of cursor position. Press
direction key to move the cursor. (The number keys cannot be used to input.)
F2 ~ F5 to choose the Parameter 1 to Parameter 4;
Figure 0-4: The User Interface of Both button
-66-
/