To Output Arbitrary Signals; To Select The Built-In Waveform - PeakTech 4125 Bedienungsanleitung

5.16. To Output Arbitrary Signals

Press button to call the user interface of Arbitrary signal, the Arbitrary waveform
parameters can be set by operating the Arbitrary setting menu on the right.
The menu items of Arbitrary waveform are: Frequency/Period, Amplitude/High Level,
Offset/Low Level, Built-in Waveform, Editable Waveform. You can operate the menu by
using the menu selection buttons on the right.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, please refer to "To
Output Sine Signals" on page 67.
The Arbitrary signal consists of two types: the system built-in waveform and the
user-definable waveform.

5.17. To Select the Built-in Waveform

There are 26 built-in Arbitrary waveforms.
Menu Settings
Common StairD/StairU/StairUD/Trapezia/RoundHalf/
AbsSine/AbsSineHalf/SineTra/SineVer
Maths ExpRise/ExpFall/Sinc/Tan/Cot/Sqrt/x^2
Window Rectangle/Gauss/Hamming/Hann/Bartlett/
Blackman/Laylight
Others DC/Heart/Round
Back
Figure 0-14: The User Interface of Arbitrary Signal
Explanation
Choose common Waveforms
Choose Math Waveforms
Choose Window Waveforms
Choose other Waveforms
Back to the previous menu
-74-