General Inspection; Foot Stool Adjustment - PeakTech 4125 Bedienungsanleitung

4.4. General Inspection

After you get a new Waveform Generator, it is recommended that you should make a
check on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has
suffered serious damage, do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories are described "Appendix A: Enclosure" of this Manual.
You can check whether there is any loss of accessories with reference to this
description. If it is found that there is any accessory lost or damaged, please get in
touch with your distributor.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument cannot work normally, or fails in the performance test, please get in touch
with your distributor. If there is damage to the instrument caused by the transportation,
please keep the package. With the transportation department or distributor
responsible for this business informed about it, a repairing or replacement of the
instrument will be arranged.

4.5. Foot Stool Adjustment

Unfold the foot stools on the bottom of the generator, as page 60 Figure 0-1 - 11.
-63-