To Generate Burst; Set The N-Cycle Burst - PeakTech 4125 Bedienungsanleitung

5.37. To Generate Burst

Burst function is only used for CH1. Press the Mod button, then press
Burst to generate versatile waveforms in burst. Burst can last for certain times of waveform
cycle (N-Cycle Burst), or to be controlled by external gated signals (Gated Burst). Bust can
apply to Sine, Square, Ramp, Pulse and Arbitrary waveforms (Noise cannot be used).
Term Explanation
Burst:
Output Waveforms with set cycle times. Generally it is called BURST function within
every Signal Generator.
N-Cycle Burst:
N-Cycle has specific number of waveform cycles, and every burst is activated by a
trigger event.
Gated Burst:
Gated burst use external source to control burst as when to be activated.

5.38. Set the N-Cycle Burst

Figure 0-21: The User Interface of N-Cycle Burst
-87-
F3 to select