B) Saving Rechargeable Battery Data - VOLTCRAFT V-CHARGE 100 DUO Bedienungsanleitung

b) Saving Rechargeable Battery Data

To save the set values, select the setting function "SAVE
PROGRAM" and then briefly push the button "START/
ENTER". Otherwise, all settings are lost.
The charger will show the corresponding display mes-
sage when saving ("SAVE....") and emit a sound signal.
Then the charger alternatingly shows the most important
information that you have stored in the memory.
In the example in the figure on the right, memory "1" holds
a LiPo rechargeable battery with 2 cells, a charging cur-
rent of 2.2 A and a discharging current of 0.4 A.
This shows you which rechargeable battery or data are
stored in the memory at first glance.
When the memory is empty, the bottom line
shows only "ENTER SET ->".
SAVE PROGRAM
SAVE PROGRAM
SAVE....
[ BATT MEMORY 1]
LiPo 7.4V(2S)

[ BATT MEMORY 1]
C:2.2A D:0.4A
[ BATT MEMORY 1]
ENTER SET->
ENTER
105